Back to top

1992 Swan 40

Belvedere, California

One of the cleanest Swan 40s ever to grace the market, PREZZO is hull #5 of the acclaimed Frers Swan 40. She is a light-use, original owner vessel commissioned in the Bay Area for day sailing. 

Her teak decks were replaced in 2011 along with her standing rigging. North Sails main & jib were also replaced in 2016. This yacht has been professionally maintained with an open checkbook her entire life with routine service at KKMI, the Bay Area's Nautors Swan Dealer. 

Bristol with a rich provenance she will not last long as the only Frers 40 on the U.S. market! 

Basic Boat Info

Price: $239,000
Boat Name: PREZZO
Make: Swan
Model: 40
Year: 1992
Condition: Used
Category: Sail
Construction: Fiberglass
Keel Type: Bulb Keel

Dimensions

Length: 40 ft
Length Overall: 40'3 ft
Waterline Length: 32'5 ft
Beam: 12'11 ft
Max Draft: 7'1 ft
Displacement: 19,400 lb
Bridge Clearance: 58'8 ft
Cabin Headroom: 6'4 ft
Ballast: 6,990 lb
Electrical Circuit: 110 V
Single Berths: 6
Cabins Count: 2

Engines / Speed

Engines: 1
  • Make: Nanni
  • Model: 4-150
  • Drive Type: SailDrive
  • Fuel: Diesel
  • Engine Power: 35hp
  • Type: Inboard
  • Year: 1992
  • Engine Hours: 600
Cruising Speed: 6.5 kn
Maximum Speed: 7.6 kn
Displacement Type: Dry Load

Tanks

Fuel Tanks: 2
Fuel Tank Capacity: 63 gal
Fuel Tank Material: Stainless Steel
Water Tanks: 2
Water Tank Capacity: 112 gal
Water Tank Material: Stainless Steel
Holding Tank Count: 1
Holding Tank Capacity: 30 gal
Holding Tank Material: Stainless Steel

Other

Heads Count: 2
Drive Type: Sail
Windlass Type: Electric
Stock Number: 5
Boat Class: Sloop, Racers and Cruisers

Contact

Nick Deuyour
City Yachts

Office

City Yachts
City Yachts 10 Marina Boulevard
San Francisco, California, US, 94123
Tel:415-567-8880


Hull and Deck

Single skin construction using glass/aramid (Kevlar) hybrid fiber reinforced polyester laminate. The deck is of GRP sandwich construction using low-density closed-cell PVC foam core. Structural bulkheads are marine grade waterproof plywood laminated to the hull. 


The keel is of elliptical bulb shape from cast lead alloyed with antimony. Elliptical rudder is foam-filled GRP with tapered, tubular, S-glass/epoxy composite stock.

Accommodations

The interior is finished in Nautor light-grained teak joinery with

Nautor’s trademark hand-rubbed satin finish varnish application. There
is a varnished teak & holly sole throughout. The heads are molded
one-piece custom GRP with tile floors, each equipped with electric
sumps for showers. Both heads are electric / macerator pump aft. Both heads are
ensuite to the cabins.

Forward is a twin V-berth with filler piece, shelves and lockers, with
dresser and hanging locker to starboard and a forward head to port.
The Main Salon has port & starboard settees and a teak centerline
table with folding leaves & removable fiddle rails. The pilot berth is
to port and lockers, bookshelf and the entertainment system are on the
starboard side. The entertainment system includes flat screen TV, and
DVD player, plus Sony 10 changer CD with Infinity cabin speakers and
cockpit speakers.

The Galley is on the port side with a gimbaled stove with oven with
extractor hood and stainless steel guard. There are CORIAN worktops
and DURAT covers for stainless steel sinks. Above the sinks is storage
for pots and pans with a drying rack below that drains into the sink
sump. There is a 3.9 cu/ft. COMBICOOL 12 VDC front-loading
refrigerator unit.

The Navigation Station is on the starboard side opposite the Galley
with chart table, chart stowage, drawers and dished Navigator's seat.

The Owner's Stateroom aft has full stand-up headroom with a large
double berth with shelf with lockers to starboard and a hanging locker
to port and vanity seat to port which can be used for additional
storage. An Isotherm freezer is located under the aft cabin berth.

Headroom: Forward Cabin (6'), Forward Head (6.0') Main Cabin (6.4'),
Galley (6.4'), Nav area (6.2'), Aft Cabin (6.4') & Aft Head (6.1')
reading lights over each berth

Engine

The NANNI 4.150 HE (4) cylinder marine diesel (Kubota block with marine accessories) fresh-water cooled is standard on the SWAN 40. The engine compartment has Nautor trademark insulation with sound-absorbent foam protected by a removable steel perforated overlay.

  • Engine & Drive-Train:
  • NANNI 4.150 HE (4) cylinder FWC diesel rated for 35 HP at 3000 RPM
  • HURTH HBW 150A transmission, reduction 2.63:1
  • Stainless steel propeller shaft
  • MAXPROP 3 blade feathering propeller
  • SEPAR fuel filter
  • Fuel capacity 55.5 US Gallons (210 liters) in 2 stainless steel tanks
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information

For Your Private Showing Please Contact

NICK DEUYOUR

_____________________________________

citysf.com          415-595-5373           nick@citysf.com


$
%
$
Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.