Back to top

1987 C&C Fiberglass 44

Tiburon, California

LANIKAI 

(Heaven by the Sea)

LANIKAI is a 1987 masthead sloop designed by Robert Ball and built by C&C Yachts in Ontario Canada.  

 MAY 2022

Marine Survey 

JULY 2022

HAULED,  PAINTED,  AND BUFFED 

ENGINE SERVICE 

 

Basic Boat Info

Boat Name: Lanikai
Make: C&C Fiberglass
Model: 44
Year: 1987
Condition: Used
Category: Sail
Construction: Fiberglass
Boat Hull ID: ZCC44029J687
Has Hull ID: Yes
Keel Type: Fin Keel

Dimensions

Length: 44 ft
Length Overall: 44'2 ft
Beam: 13'3 ft
Max Draft: 5'7 ft
Displacement: 22,500 lb
Single Berths: 2
Double Berths: 2
Cabins Count: 3

Engines / Speed

Engines: 1
  • Make: Yanmar
  • Rope Cutter: true
  • Model: 4JHE
  • Drive Type: Direct
  • Fuel: Diesel
  • Engine Power: 44hp
  • Type: Inboard
  • Propeller Type: 3 Blade, Bronze, Feathering
  • Year: 1987
  • Engine Hours: 1500
  • Engine Location: Center

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 75 gal
Fuel Tank Material: Aluminum
Water Tanks: 2
Water Tank Capacity: 30 gal
Water Tank Material: Plastic
Holding Tank Count: 1
Holding Tank Capacity: 15 gal
Holding Tank Material: Plastic

Other

Heads Count: 2
Drive Type: Direct
Windlass Type: Electric
Boat Class: Sloop

Contact

Christine Kaplan
City Yachts

Office

City Yachts
City Yachts 10 Marina Boulevard
San Francisco, California, US, 94123
Tel:415-567-8880
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


UPGRADES
  • new bottom July 2022
  • Serviced Hydraulic backstay and Vang system July 2022
  • Engine Service July 2022
  • deck paint 2017
  • Cutless bearing 2018
  • rudder removed and new bearing and packing 2010
  • Main and Jib rebuilt by UK Sails 2017
  • replaced refrigeration - water cooled to air cooled circa 2011
  • new running rigging 2018
  • replaced Navtec Auto Pilot at helm - circa 2011
Additional Equipment and Accessories
  • SPECTRA MPC 3000 Water maker ( pickled) 
  • modified keel - the centered board has been tucked inside the keel and covered with a lead plug 
  • Monitor Windvane 
  • cushions for lazarettes and for helm 
  • Shore Power cord 
  • Assorted lines and fenders
  • Spares and manuals 
  • BBQ
  • Outboard motor mount and lift
  • bimini
  • Air dryer dehumidifiers 
  • boat hook
  • Samsung TV 
  • Alpine stereo and CD Changer 
  • Maxwell 1200  12 VDC electric windlass 
RIGGING / WINCHES
  • Furl Boom and Schaefer Roller furling jib 
  • Ballenger Mast retrofit 
  • Rod Rigging
  • Robust stainless pulpit 
  • Electric Anderson winch - starboard side for furling , mainsheet etc. 
  • Navtec Hydraulic backstay /vang 
  • Two Barient 36 ST
  • Two Barient 32 - Recommend service and lubricate
  • Two Barient 24 ST
  • One Barient 24
  • One Anderson 46st  Electric 
  • Harken Mainsheet traveler
Galley
  • Double stainless steel sink
  • three burner Hillerange stove and oven - LPG
  • Vitrifrigo cold plate refreigeration 
  • Origo Microwave 
Engine
  • YANMAR 4JHE Diesel 
  • Dripless shaft gland 
  • Heat exchanger with raw water cooled exhaust 
  • Kanzaki KB20 Transmission  S/N  2341  2.17 Ratio 
ELECTRICAL
  • AC 110 volts  /   DC  12 volts
  • four Grp 31 Lifeline AGM house batteries 
  • One Grp 31 AGM engine start battery 
  • Perko Battery Switches  
  • Battery Charger 
  • DC/AC INVERTER  - Freedom 2500 watt inverter with heart interface controller 
ELECTRONICS AND NAVIGATION EQUIPMENT
  • ICOM M602  VHF with remote mic 
  • FURUNO NAVNET C-map NT radar 36 mile 
  • GARMIN 2010C color GPS Chartplotter 
  • GARMIN 2006C color GPS Chartplotter
  • COMNAV Commander autopilot 
  • COMNAV NX2 multi nav depth, log and repeater 
  • RITCHIE compass
  • ICOM M 802 SSB/Ham radio 
  • COMNAV NX2 Mulito nav boat/ wind speed and wind point 
SAFETY EQUIPMENT
  • Four Type III life jackets - USCG approved
  • USCG Throwable device
  • Fire extinguishers
  • Horn 
  • Life Raft -  needs service to certify 
  • EPIRB 
  • Search Light 
  • MOB Assorted Bilge pumps 
RUNNING GEAR
  • MAXPROP with propspeed and line cutter 
Disclosures

Forward Head does not have a holding tank 

Headroom Measurements

Headroom ( etc. )   C&C 44  LANIKAI

6' 8"   Base of Companionway Ladder 6'7"   Nav Station 6' 7"  Galley Sink  6' 2"  Forward end of Aft Cabin Berth  6' 3"   Length of Aft Cabin Centerline Berth  6' 5"  Aft Head  6' 3 1/2"  Center of Salon at the Mast  6' 10"  Salon Settees Port and Starboard with Lee Cloths  6' 4"  Forward Head  6' 3"  Angling down to 5' 7"  at the deck hatch - Forward Cabin  6' 6"  Forward  "V" Berth
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information

For details please contact Broker CHRISSY KAPLAN  |  chrissy@citysf.com   |   415-567-8880


$
%
$
Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.